Mechanism of Insoluble Aggregate Formation in a Reconstituted Solution of Spray-Dried Protein Powder
DiscussionThe spray-drying process could have disrupted the higher-order structure of proteins and exposed the hydrophobic residues in CDR-1 of the heavy chain, contributing to the formation of aggregate through hydrophobic interactions upon reconstitution of spray-dried powder. These results can contribute to efforts to design spray-dry resilient protein constructs and improve the robustness of the spray-drying process. (Source: Pharmaceutical Research)
Source: Pharmaceutical Research - May 2, 2023 Category: Drugs & Pharmacology Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
