Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
Transfer rates of Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate impacted by macronutrient composition of food inks in 3D food printing systems
This study aimed to determine if the macromolecular composition of food inks would impact the transfer rate of foodborne pathogens from the stainless steel food ink capsule to the 3D printed food. Salmonella Typhimurium, Listeria monocytogenes, and a human norovirus surrogate, Tulane virus (TuV), were inoculated onto the interior surface of stainless steel food ink capsules and dried for 30 min. Subsequently, 100 g of one of the following prepared food inks was extruded: (1) pure butter, (2) a powdered sugar solution, (3) a protein powder solution, and (4) a 1:1:1 ratio of all three macromolecules. Pathogen enumeration was...
Source: Food Microbiology - April 25, 2023 Category: Food Science Authors: Allyson N Hamilton Kristen E Gibson Source Type: research
