Numerical investigation of patient-specific thoracic aortic aneurysms and comparison with normal subject via computational fluid dynamics (CFD)

In this study, two scans of thoracic aortic aneurysm (TAA) subject with different AADs (42.94  mm and 48.01 mm) and a scan of a normal subject (19.81 mm) were analyzed to assess the effects of hemodynamics on the progression of TAA with the same flow rate. Real-patient aortic geometries were scanned by computed tomography angiography (CTA), and steady and pulsatile flow conditions were us ed to simulate real patient aortic geometries. Aortic arches were obtained from routine clinical scans. Computational fluid dynamics (CFD) simulations were performed with in vivo boundary conditions, and 3D Navier-Stokes equations were solved by a UDF (user-defined function) code defining a real car diac cycle of one patient using Fourier series (FS). Wall shear stress (WSS) and pressure distributions were presented from normal subject to TAA cases. The results show that during the peak systolic phase pressure load increased by 18.56% from normal subject to TAA case 1 and by 23.8% from normal s ubject to TAA case 2 in the aneurysm region. It is concluded that although overall WSS increased in aneurysm cases but was low in dilatation areas. As a result, abnormal changes in WSS and higher pressure load may lead to rupture and risk of further dilatation. CFD simulations were highly effective to guide clinical predictions and assess the progress of aneurysm regions in case of early surgical intervention.Graphical abstract
Source: Medical and Biological Engineering and Computing - Category: Biomedical Engineering Source Type: research