Does overlay preparation design affect polymerization shrinkage stress distribution? A 3D FEA study.

This study evaluated the polymerization shrinkage stress of three tooth preparation designs for indirect ceramic overlay by finite element analysis: isthmus preparation (IST); without isthmus preparation (wIST); and non-retentive preparation (nRET). The models were created based in prepared dental typodonts and were digitally impressed with an intraoral scanner. The interfaces in all models were considered perfectly bonded and all materials were considered homogeneous, linear, and isotropic. The polymerization shrinkage of the cement layer (100 µm) was simulated and evaluated by maximum principal stress criteria. The stress peaks followed this sequence: restoration = IST (13.4 MPa) > wIST (9.3 MPa) > nRET (9 MPa); cement layer = IST (16.9 MPa) > wIST (12.6 MPa) > nRET (10-7.5 MPa); and teeth = IST (10.7 MPa) > wIST (10.5 MPa) > (9 MPa). For the cement layer, the non-retentive preparation (nRET) had the lowest shrinkage stress from all the groups, obtaining a more homogeneous stress distribution on the cement surface. Regarding the abutment teeth, the IST generated a higher shrinkage stress area on the dental structure, concentrating higher stress magnitude at the axiopulpar and axiogingival angles. Non-retentive preparation seems to reduce polymerization shrinkage stress. PMID: 33410710 [PubMed - as supplied by publisher]
Source: Computer Methods in Biomechanics and Biomedical Engineering - Category: Biomedical Engineering Authors: Tags: Comput Methods Biomech Biomed Engin Source Type: research