Removal of mutagen X “MX” from drinking water using reduced graphene oxide coated sand particles

In this study, Mutagen X was removed from aqueous media by a thermally reduced graphene oxide bonded on the surface of amino-functionalized sand particles.MethodA Box-Behnken design was applied to optimize the adsorption process. Characterization of the adsorbent and graphene oxide was accomplished using scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Raman analysis. The effects of three independent parameters, including initial concentration (20 –200 μg L−1), temperature (5 –30 °C), and adsorbent dose (2–80 g L−1) were examined using batch experiments.ResultsCharacterization results confirmed that the graphene oxide was successfully coated on the surface of sand particles. Regression analysis of experimental results showed a great fit with a quadratic polynomial model with the R2 = 0.999. Optimum conditions (initial concentration: 20 μg L−1, temperature: 30  °C, and adsorbent dose: 80 g L−1) with the desirability of 1.0 resulted in the minimum residual concentration of Mutagen X (2  μg L−1). Equilibrium study results depicted that the experimental data were fitted well to the Freundlich and UT isotherm models.
Source: Journal of Environmental Health Science and Engineering - Category: Environmental Health Source Type: research