Comparative study of the effect of Er:YAG and Er:Cr;YSGG lasers on porcelain: etching for the bonding of orthodontic brackets

This study investigated the effect of Er:YAG (smart 2940 Dplus, DEKA, Italy) and Er:CrYSGG (Waterlase iPlus, Biolase, USA) lasers on the shear bond strength (SBS) between the orthodontic brackets and dental porcelain in comparison with conventional acid etching with 9% hydrofluoric acid (HF, Ultradent, USA). A total of 60 specimens of maxillary incisor crown were prepared and randomly assigned to five groups; each group was subjected to a different porcelain surface conditioning: (1) etching with the 9% HF for 2  min; (2) etching with the 9% HF for 2 min followed by irradiation with the Er:CrYSGG laser (3-W power, 10-Hz frequency for 10 s); (3) etching with the 9% HF for 2 min followed by irradiation with the Er:YAG laser (3-W power, 10-Hz frequency for 10 s); (4) Irradiation with the Er:CrYSGG laser ( 3-W power, 10-Hz frequency for 10 s without acid etching) and (5) irradiation with the Er:YAG laser (3-W power,10-Hz frequency for 10 s without acid etching). After using Transbond XT primer and Transbond XT adhesive, the metal brackets (Dentaurum, Germany equilibrium 2, optimal design) bonded to the conditioned porcelain surface. Subsequently, the specimens were thermocycled for 5000 cycles and then debonded using the Universal Testing Machine (Zwick). In each group, one specimen was not bonded to brackets to allow further examination with electron microscopy. After debonding, the specimen s were examined by stereomicroscope to determine their adhesive remnant index (A...
Source: Lasers in Medical Science - Category: Laser Surgery Source Type: research