Treatment of the railway freight wagon wash effluents by coagulation methods on accelator reactor

AbstractThis paper presents results of the research carried out on a system made to pretreat the effluents produced in water treatment of dirty surfaces of railway transportation means (RTMs) mainly G, H, T and incidental F classes of rolling stock according to the International Union of Railways (IURs). The installation was designed for coagulation –flocculation pretreatment of wastewater with flow accelator reactor (AR) in total amount of up to 75.0 m3 day−1. The raw wastewater (RW) was characterized by a significant diversity of loads: TSS (total suspended solids), TDS (total dissolved solids), COD& BOD5 (chemical& biochemical oxygen demand) and periodically it had extremely different colors, Ta (turbidity) and EE (etheric extract). The application of two-stage, coupled acid-alkali or alkaline-acid coagulation using aluminum coagulants with final flocculation and phase separation in the system implemented in practice to treat the wastewater of statistically typical composition, usually allowed to removal, accordingly: EE& TSS  >  99% and to eliminate completely color and Ta. However, COD and BOD5 were removal at different levels, depending on both initial concentrations and chemical composition of load pools registered in the RW, and a type of coagulation used. The use of pre-oxidation with aqueous solutions of hydrogen peroxide or peracetic acid coupled with coagulation based only on aluminum coagulants helps to achieve equal levels of removal of ...
Source: Journal of Environmental Health Science and Engineering - Category: Environmental Health Source Type: research