Geopolymer-based moisture sensors for reinforced concrete health monitoring

Publication date: Available online 23 January 2020Source: Sensors and Actuators B: ChemicalAuthor(s): Lorena Biondi, Marcus Perry, Jack McAlorum, Christos Vlachakis, Andrea HamiltonAbstractMoisture plays a critical role in reinforced concrete corrosion, underpinning structural degradation which costs the global economy a staggering $350 bn per year (0.5% GDP). Both moisture sensors and repair materials that limit water ingress are required, but monitoring and maintenance are often viewed as separate challenges. This paper outlines a first-time demonstration of moisture sensors based on low calcium fly ash geopolymers — a class of cementitious, electrolytically conductive repair materials. Electrochemical impedance spectroscopy and equivalent circuit models are used to understand and optimize the electrical response of geopolymer sensors to water content and temperature. Moisture and temperature precisions of 0.1 wt% and 0.1 ° C are demonstrated respectively, and sensor drifts over 20 minute periods were found to be within 1–3%. Sensor responses were also shown to be repeatable to within 3% between wetting and thermal cycles. Results from spectrometry and chromatography analyses link this repeatability to the minimal ion leaching from the sensors. The study demonstrates the feasibility of moisture sensing using geopolymers, and furthers our current understanding of the role of moisture in the ionic conductivity of alkali-activated materials. This work is an...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research