Combined Fungal and Photo-oxidative Fenton Processes for the Treatment of Wood-Laminate Industrial Waste Effluent

Publication date: Available online 17 June 2019Source: Journal of Hazardous MaterialsAuthor(s): Otto Lucas Heinz, Mário A.A. Cunha, Jéssica S. Amorim, Aneli M. Barbosa-Dekker, Robert F.H. Dekker, Marcio Barreto-RodriguesAbstractThe present study reports on the remediation of an effluent from the wood-laminate industry using Pleurotus ostreatus EB 016 in combination with photo-Fenton oxidation. Fermentation of the effluent with P. ostreatus EB-016 was carried out in agitated flasks to evaluate the influence of pH, and concentrations of carbon and nitrogen sources by a multivariate approach. Subsequently, bioassays was conducted in an air-lift bioreactor using the pre-optimized conditions. In addition, photo-Fenton oxidative treatment was employed to degrade recalcitrant compounds, and the ecotoxicity of the effluents were evaluated using Escherichia coli as a biological model. The crude effluent presented high contents of total phenolics (1,220 mg/L), solids (18.45 g/L) and color intensity (8,333 CU), besides high values of chemical (COD 2,477 mg O2./L) and biochemical (BOD5, 8,450 mg O2/L) oxygen demand. Another feature was the high inhibition on Escherichia coli (71%). Reduction of 64% COD was obtained under optimized conditions (pH5.7, 7.5 g/L sucrose, 4.0 g/L ammonium nitrate) in agitated flasks after 10 days treatment. In the air-lift reactor, 50.6% COD and 29.9% total phenols were removed after 10 days. Combination of biotreatment with photo-Fenton oxidatio...
Source: Journal of Hazardous Materials - Category: Environmental Health Source Type: research