Sulfurizing Sputtered-ZnO as buffer layer for cadmium-free Cu2ZnSnS4 solar cells

Publication date: October 2019Source: Materials Science in Semiconductor Processing, Volume 101Author(s): Shuai Yang, Shurong Wang, Hua Liao, Xin Xu, Zhen Tang, Xinyu Li, Xiang Li, Tingbao Wang, Di LiuAbstractIn this work, Cadmium-free Zn(O,S) buffer layers were prepared by sulfurizing sputtered-ZnO films. The impacts of different annealing atmosphere and sulfurization temperatures on the properties of Zn(O,S) films were investigated. The sputtered-ZnO films were annealed at 150 °C for 30min under the air and oxygen gas atmosphere, and following sulfurized at 200 °C, 260 °C and 320 °C for 50min under the N2 atmosphere with sulfur powder, respectively. As a result, the ZnO films were annealed at 150 °C for 30min under O2 atmosphere and following sulfurized at 260 °C for 50min, which could obtain the best performance of Zn(O,S) film. The morphologies of Zn(O,S) films were more compact and uniform due to the reduction of oxygen loss. Meanwhile, the optimal sulfurization temperature could decrease the amounts of traps, which resulted in reducing the recombination and improving the transport of charge carriers. Finally, Cadmium-free Cu2ZnSnS4 (CZTS) thin film solar cells with Zn(O,S) buffer layers were fabricated. The short circuit current density (Jsc) and open circuit voltage (Voc) of Zn(O,S)-based solar cells could be increased by improving the transmittance at short wavelength region and tuning the band offsets at Zn(O,S)/CZTS interface, and the best conversi...
Source: Materials Science in Semiconductor Processing - Category: Materials Science Source Type: research