Corrosion Inhibition of Mild Steel in HCl Medium by S-benzyl-O,O'-bis(2-naphthyl)dithiophosphate with Ultra-long Lifespan

Publication date: Available online 11 July 2018Source: Results in PhysicsAuthor(s): Chengduan Wang, Chuan Lai, Bin Xie, Xiaogang Guo, Dong Fu, Bin Li, Shasha ZhuAbstractHerein, the target compound of S-benzyl-O,O'-bis(2-naphthyl)dithiophosphate (SBOB) as corrosion inhibitor with ultra-long lifespan was successfully synthesized and characterized by elemental analysis, single crystal X-ray diffraction and spectroscopy involving FT-IR, 1H, 13C and 31P NMR. Meanwhile, the inhibition performance and mechanism of SBOB for mild steel (MS) in HCl medium were combined to investigate by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy and quantum chemical calculation. The potentiodynamic polarization results indicate that SBOB is a mixed-type inhibitor. All experimental results are in good agreement and reveal that the corrosion inhibition increases with the concentration of SBOB. Weight loss results indicate that the inhibition efficiency decreases with HCl concentration and temperature increasing, but the corrosion inhibition performance of SBOB keeps almost unchanged after ultra-long storage time due to the formation of inhibitor film by the physisorption and chemisorption of SBOB on MS surface.
Source: Results in Physics - Category: Physics Source Type: research

Related Links:

In conclusion, although the films loaded with nanoclays exhibited better properties than the control film, inclusion of TiO2 more improved the functional characteristics of them and extended the potential as a biodegradable packaging.
Source: Carbohydrate Polymers - Category: Biomedical Science Source Type: research
Publication date: 10 November 2018Source: Sensors and Actuators B: Chemical, Volume 273Author(s): Sarada Idris, Nur Hidayah Azeman, Noor Azwen Noor Azmy, Chantara Thevy Ratnam, Mohd Adzir Mahdi, Ahmad Ashrif A. BakarAbstractTapered optical fiber coated with pyrrole/poly(vinyl alcohol)-glucose oxidase (Py/PVA-GOx) for glucose biosensing was successfully fabricated by radiation immobilization of GOx onto polymeric surfaces. Polymerization of pyrrole and PVA crosslinking was carried out by means of gamma irradiation. The nature of enzyme immobilization was studied by Fourier transform infrared spectroscopy, X-ray photoelectro...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research
Publication date: 10 November 2018Source: Sensors and Actuators B: Chemical, Volume 273Author(s): M. Donarelli, R. Milan, F. Rigoni, G. Drera, L. Sangaletti, A. Ponzoni, C. Baratto, G. Sberveglieri, E. CominiAbstractα-Fe2O3 nanorods have been grown by hydrothermal method, dispersed in ethanol and drop casted on a pre-patterned alumina substrate with Pt electrodes. Their morphology, crystalline and electronic properties have been investigated by Scanning Electron Microscopy, Raman and X-ray Photoelectron Spectroscopies and X-ray Diffraction. The so-fabricated devices have been used for hydrogen gas sensing, showing th...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research
Publication date: 10 November 2018Source: Sensors and Actuators B: Chemical, Volume 273Author(s): Yuanyuan Lu, Xinqiang Liang, Jianming Xu, Ziyi Zhao, Guangming TianAbstractCuZrO3 nanocomposites were prepared by chemical precipitation and oxidation at a high temperature (700 °C). The structural features of the fabricated CuZrO3 nanocomposites (CuZrO3 NCs) were elucidated by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results presented herein show that these nanocomposites formed a nanograde needle structure...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research
Publication date: 10 November 2018Source: Sensors and Actuators B: Chemical, Volume 273Author(s): Songya Cui, Yisha You, Kangyi Zhao, Yongqi Fu, Shaoli ZhuAbstractA novel metasurface-based nanoantennas array fabricated using a technique of heavy ion tracking is introduced. The technique has advantages of large area patterning, high aspect ratio of the nanoantennas, controllable length, and multi-choice of materials etc. Fabrication process, numerical calculation and optical near-field characterization of the structure are presented. Evidenced by probing results of our near-field scanning optical microscope, the sharp nanoa...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research
Publication date: 10 November 2018Source: Sensors and Actuators B: Chemical, Volume 273Author(s): Nguyen Duc Hoa, Chu Manh Hung, Nguyen Van Duy, Nguyen Van HieuAbstractUnderstanding the formation mechanism and control of crystal evolution of nanoporous materials is important in the synthesis of nanoporous materials for enhanced gas-sensing performance. Herein, single crystal nickel hydroxide nanosheets were prepared by hydrothermal reaction between nickel chlorine and ammonium hydroxide. Then, the products were subsequently calcined at 400, 500, 600, and 700 °C in air to form nanoporous NiO nanosheets. Evolution of the...
Source: Sensors and Actuators B: Chemical - Category: Chemistry Source Type: research
Publication date: August 2018Source: Journal of Environmental Chemical Engineering, Volume 6, Issue 4Author(s): Ebrahim Sharifpour, Hedayat Haddadi, Mehrorang Ghaedi, Kheibar Dashtian, Arash AsfaramAbstractA new mesocellular silica foam (MCSiF) were successfully formed on the surface of activated carbon (AC) and subsequently for increases of surface and pours area of samples the AC was removed by calcination and products was functionalized by polymixin B as an antimicrobial cationic amphiphile agent. The synthesis samples structures were characterized with several techniques including X-ray diffraction (XRD), Fourier trans...
Source: Journal of Environmental Chemical Engineering - Category: Chemistry Source Type: research
Publication date: 20 October 2018Source: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 555Author(s): Shaolin Yang, Yutong Ji, Yueling Wu, Jinfu Ma, Zhongli Zou, Hui LuAbstractAn environmental-friendly, cost-effective and mild approach to prepare graphene-based sponge (GS) by in situ reduction-assembly of graphene sheets on the skeletons of melamine sponge was reported. The fabrication process is facile and no freeze-drying process is required. The structures of the GS were characterized by Raman spectra, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microsc...
Source: Colloids and Surfaces A: Physicochemical and Engineering Aspects - Category: Chemistry Source Type: research
In this study, the role of Aerosil 200 as rheological modified and stabilizer has been studied. On top of that, the synergic rheological effect between this fumed silica and Amidet N has been proved.Graphical abstract
Source: Colloids and Surfaces A: Physicochemical and Engineering Aspects - Category: Chemistry Source Type: research
Publication date: Available online 19 July 2018Source: Chemical Engineering ScienceAuthor(s): Tao Yang, Doris Segets, Thaseem Thajudeen, Yongsheng Han, Wolfgang PeukertAbstractSilver particles, prepared in a T-mixer under different flow rates, were selected to study the influences of mixing on particle shape evolution. Mixing effects on particle growth were visualized by scanning electron microscopy (SEM) and analysed quantitatively by sedimentation coefficient distributions derived from analytical centrifugation (AC). The mixing time under different flow rates was determined by the Villermaux-Dushman method to quantify th...
Source: Chemical Engineering Science - Category: Chemistry Source Type: research
More News: Chemistry | PET Scan | Physics | Weight Loss