Investigation on the source of VOCs emission from indoor construction materials using electronic sensors and TD-GC-MS

In this study, the VOCs found in a brand new office complex were monitored over a period of 6 months, with an emphasis on monitoring and quantifying harmful VOCs and identifying their emission source. Air samples were taken from a closed, unoccupied office space on a weekly basis and analysed using Thermal Desorption-Gas Chromatography-Mass Spectrometry (TD-GC-MS), while continuous monitoring of the air quality was performed using two commercially available IAQ sensors. To identify the source of the emitted VOCs, pieces of all construction material that were used in the office, including flooring, finished wall material and adhesive glues, were removed, and placed in air-tight glass containers prior to analysis confirming that the source of VOCs is indeed the flooring. Identified compounds included mainly material origin VOCs such as BTEX (benzene, toluene, ethylbenzene, xylene) and styrene, but also common VOCs such as acetone and propan-2-ol. Of significant importance was the concentration of toluene that was found to be the most abundant VOC in both the flooring material and the indoor air.PMID:38503351 | DOI:10.1016/j.envpol.2024.123765
Source: Environmental Pollution - Category: Environmental Health Authors: Source Type: research