Research on ultrasonic bone cutting mechanism based on extended finite element method

Biomech Model Mechanobiol. 2024 Jan 23. doi: 10.1007/s10237-023-01810-6. Online ahead of print.ABSTRACTThe research on the crack propagation mechanism of bone has important research significance and clinical medical value for the selection of cutting parameters and the development of new surgical tools. In this paper, an extended finite element method (X-FEM) model of ultrasonic bone cutting considering microstructure was developed to further study the ultrasonic bone cutting mechanism and to quantitatively analyze the effects of cutting direction, ultrasonic parameters, and cutting parameters on the mechanism of ultrasonic bone cutting crack propagation. The results show that ultrasonic bone cutting is essentially a controlled crack propagation process, in which brittle crack and fatigue crack are the main crack propagation mechanisms. In order to improve the efficiency of ultrasonic bone cutting, large amplitude and high-frequency ultrasonic vibration are preferred. Compared with the other two cutting directions, the crack propagation deflection angle in the transverse cutting direction is the largest, resulting in the worst cutting surface. Therefore, in the path planning of orthopedic surgical robots, the transverse cutting direction should be avoided as much as possible. Frequency only has a significant effect on the crack propagation rate and has a positive correlation. There is a positive correlation between the deflection angle, propagation length, propagation rate, a...
Source: Biomechanics and Modeling in Mechanobiology - Category: Biomedical Science Authors: Source Type: research