Electrochemical H < sub > 2 < /sub > O < sub > 2 < /sub > - stat mode as reaction concept to improve the process performance of an unspecific peroxygenase

In this study, two in-situ electrogeneration modes of H2O2 were established and compared. Experiments under galvanostatic conditions (constant productivity of H2O2) were conducted at current densities spanning from 0.8mAcm-2 to 6.4mAcm-2. For comparison, experiments under H2O2-stat mode (constant H2O2 concentration) were performed. Here, four H2O2 concentrations between 0.06mM and 0.28mM were tested. A maximum H2O2 productivity of 5.5µMmin-1 cm-2 and productivity of 10.5gL-1 d-1 were achieved under the galvanostatic condition at 6.4mAcm-2. Meanwhile, the highest total turnover number (TTN) of 710,000molmol-1 and turnover frequency (TOF) of 87.5s-1 were obtained under the H2O2-stat mode at concentration limits of 0.15mM and 0.28mM, respectively. The most favorable outcome in terms of maximum achievable TTN, TOF and productivity was found under the H2O2-stat mode at concentration limit of 0.2mM. Here, a TTN of 655,000molmol-1, a TOF of 80.3s-1 and a productivity of 6.1gL-1 d-1 were achieved. The electrochemical H2O2-stat mode not only offers a promising alternative reaction concept to the well-established galvanostatic mode but also enhances the process performance of unspecific peroxygenases.PMID:37852437 | DOI:10.1016/j.nbt.2023.10.007

Source: New Biotechnology - October 18, 2023 Category: Biotechnology Authors: Giovanni V Sayoga Victoria S Bueschler Hubert Beisch Tyll Utesch Dirk Holtmann Bodo Fiedler Daniel Ohde Andreas Liese Source Type: research