Ferrite Concentrating and Shielding Structure Design of Wireless Power Transmitting Coil for Inductively Coupled Capsule Robot

High permeability material, especially the ferrite, has been widely used in wireless power transfer (WPT) to enhance the power transfer efficiency (PTE). However, for the WPT system of inductively coupled capsule robot, the ferrite core is solely introduced in power receiving coil (PRC) configuration to enhance the coupling. As for the power transmitting coil (PTC), very few studies focus on the ferrite structure design, and only the magnetic concentrating is taken into account without careful design. Therefore, a novel ferrite structure for PTC giving consideration to the magnetic field concentration as well as the mitigation and shielding of the leaked magnetic field is proposed in this paper. The proposed design is realized by combing the ferrite concentrating part and shielding part into a whole and providing a low reluctance closed path for magnetic induction lines, thereby improving the inductive coupling and PTE. Through analyses and simulations, the parameters of the proposed configuration are designed and optimized in terms of average magnetic flux density, uniformity, and shielding effectiveness. Prototypes of PTC with different ferrite configurations are established, tested, and compared to validate the performance enhancement. The experimental results indicate that the proposed design notably improves the average power delivered to the load from 373 mW to 822 mW and the PTE from 7.47% to 16.44%, with a relative percentage difference of 119.9%....
Source: IEEE Transactions on Biomedical Circuits and Systems - Category: Biomedical Engineering Source Type: research