Journal of Materials Research and Technology This is an RSS file. You can use it to subscribe to this data in your favourite RSS reader or to display this data on your own website or blog.
Study on properties of SLM-NiTi shape memory alloy under the same energy density
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Zhenglei Yu, Zezhou Xu, Yunting Guo, Renlong Xin, Ruiyao Liu, Chaorui Jiang, Lunxiang Li, Zhihui Zhang, Luquan Ren (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 14, 2021 Category: Materials Science Source Type: research
Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): S. Dourandish, M. Jahazi, G.R. Ebrahimi, L. Ebacher (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 14, 2021 Category: Materials Science Source Type: research
Thermal decomposition characteristics of retained austenite and its influence on impact toughness of B-containing 9Cr1Mo1Co(FB2) steel during the two-step tempering
Publication date: May–June 2021Source: Journal of Materials Research and Technology, Volume 12Author(s): Jianfeng Gu, Lizhan Han, Gang Shen, Chuanwei Li (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
Microstructural investigation of direct laser deposition of the Ti-6Al-4V alloy by different melt pool protection conditions
Publication date: Available online 11 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): Amin Nourollahi, Reza Shoja Razavi, Masoud Barekat, Mohammad Vakilzadeh Anaraki, Mohammad Erfanmanesh (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
Effects of Synthesis-Solvent Polarity on the Physicochemical and Rheological Properties of Poly(N-Isopropylacrylamide) (PNIPAm) Hydrogels
Publication date: Available online 12 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): Md Mohosin Rana, Ashna Rajeev, Giovanniantonio Natale, Hector De la Hoz Siegler (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
In-situ synthesis of nano SiC particles in Al-Si-C system at 750°C
Publication date: Available online 12 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): Chongchong Wu, Tong Gao, Jinfeng Nie, Liang Jiang, Xiangfa Liu (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
A new high-speed observation system for evaluating the spark location in WEDM of Inconel 718
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Zhi Chen, Hongbing Zhou, Zhaojun Yan, Fenglin Han, Hongzhi Yan (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
Solid state synthesis, sintering and dielectric properties of Li2MnSiO4 ceramics
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Yuanxun Li, Rui Peng, Yongcheng Lu, Minshu Chen (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 12, 2021 Category: Materials Science Source Type: research
Hot deformation behavior and 3D processing map of super austenitic stainless steel containing 7Mo–0.46N–0.02Ce: Effect of the solidification direction orientation of columnar crystal to loading direction
Publication date: Available online 10 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): Lin Wang, Zhuoyuan Li, Xin Hu, Bo Lv, Chen Chen, Fucheng Zhang (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 11, 2021 Category: Materials Science Source Type: research
Fresh and mechanical properties of concrete made of binary substitution of millet husk ash and wheat straw ash for cement and fine aggregate
Publication date: Available online 11 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): Naraindas Bheel, Montasir Osman Ahmed Ali, Mehmet Serkan KIRGIZ, André Gustavo de Sousa GALDINO, Aneel Kumar (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 11, 2021 Category: Materials Science Source Type: research
TEM study of S' hardening precipitates of the cold rolled and aged AA2024 aluminum alloy: Influence on the microstructural evolution, tensile properties & electrical conductivity
Publication date: Available online 11 May 2021Source: Journal of Materials Research and TechnologyAuthor(s): S.H. Mousavi Anijdan, D. Sadeghi-Nezhad, H. Lee, W. Shin, N. Park, M.J. Nayyeri, H.R. Jafarian, A.R. Eivani (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 11, 2021 Category: Materials Science Source Type: research
Antisolvent-assisted one-step solution synthesis of defect-less 1D MAPbI3 nanowire networks with improved charge transport dynamics
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Kyungeun Jung, Weon-Sik Chae, Kwang-Hoon Lee, Man-Jong Lee (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 11, 2021 Category: Materials Science Source Type: research
Effects of groove on the microstructure and mechanical properties of dissimilar steel welded joints by using high-entropy filler metals
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Dejia Liu, Weixiong Wang, Xuean Zha, Rui Guo, Haitao Jiao, Longzhi Zhao (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 11, 2021 Category: Materials Science Source Type: research
Study on structure and process performance of laser cladding nickel-based coating
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Fangping Yao, Lijin Fang, Gao song Li (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 10, 2021 Category: Materials Science Source Type: research
Influence of welding sequence on residual stress distribution and deformation in Q345 steel H-section butt-welded joint
Publication date: July–August 2021Source: Journal of Materials Research and Technology, Volume 13Author(s): Yifeng Wang, Guangjie Feng, Xiaowei Pu, Dean Deng (Source: Journal of Materials Research and Technology)
Source: Journal of Materials Research and Technology - May 10, 2021 Category: Materials Science Source Type: research