Revealing the composite fretting-corrosion mechanisms of Ti6Al4V alloy against zirconia-toughened alumina ceramic in simulated body fluid
In this study, the tangential-radial composite fretting was realized by applying a normal alternating load to the tangential fretting. The composite fretting corrosion behavior of zirconia toughened alumina ceramic/Ti6Al4V alloy used for the head-neck interface of an artificial hip joint under simulated body fluid was investigated. The effects of displacement and alternating load amplitude were considered. The alternating load amplitude was given by the maximum normal load and minimum normal load ratio R. The results showed that the composite fretting damage mechanisms of this pair were mainly abrasion and tribocorrosion. ...
Source: Journal of the Mechanical Behavior of Biomedical Materials - August 17, 2023 Category: Materials Science Authors: Jian Pu Yali Zhang Xiaogang Zhang Xiaoyu Zhang Xinlu Yuan Zhongyi Wang Guoxian Zhang Wen Cui Zhongmin Jin Source Type: research
Revealing the composite fretting-corrosion mechanisms of Ti6Al4V alloy against zirconia-toughened alumina ceramic in simulated body fluid
In this study, the tangential-radial composite fretting was realized by applying a normal alternating load to the tangential fretting. The composite fretting corrosion behavior of zirconia toughened alumina ceramic/Ti6Al4V alloy used for the head-neck interface of an artificial hip joint under simulated body fluid was investigated. The effects of displacement and alternating load amplitude were considered. The alternating load amplitude was given by the maximum normal load and minimum normal load ratio R. The results showed that the composite fretting damage mechanisms of this pair were mainly abrasion and tribocorrosion. ...
Source: Journal of the Mechanical Behavior of Biomedical Materials - August 17, 2023 Category: Materials Science Authors: Jian Pu Yali Zhang Xiaogang Zhang Xiaoyu Zhang Xinlu Yuan Zhongyi Wang Guoxian Zhang Wen Cui Zhongmin Jin Source Type: research
Finite Element Analysis of Acetabulum Prosthesis' Lining Damage Zone with Different Implanting Angle
CONCLUSION: The groups of combinations of abduction angle 50° vs. anteversion angle 10° have been found to have relatively smallest interface plastic strain and fatigue fracture volume value in the total hip arthroplasty.PMID:37304323 | PMC:PMC10256448 | DOI:10.1155/2023/9350474 (Source: Computational and Mathematical Methods in Medicine)
Source: Computational and Mathematical Methods in Medicine - June 12, 2023 Category: Statistics Authors: Yiqun Bian Hao Wang Anqi Huang Source Type: research
