Survey of patient-specific quality assurance practice for IMRT and VMAT

The objectives were to assess the current state of PSQA practice, identify areas for potential improvement, and facilitate the continued improvement in standardization, consistency, efficacy, and efficiency of PSQA regionally. The survey asked 40 questions related to PSQA practice for IMRT/VMAT delivery. The questions addressed PSQA policy and procedure, delivery log evaluation, instrumentation, measurement setup and methodology, data analysis and interpretation, documentation, process, failure modes, and feedback. The focus of this survey was on PSQA activities related to routine IMRT/VMAT treatments on conventional linacs, including stereotactic body radiation therapy but excluding stereotactic radiosurgery. The participating centers were instructed to submit answers that reflected the collective view or opinion of their department and represented the most typical process practiced. The results of the survey provided a snapshot of the current state of PSQA practice in Ontario and demonstrated considerable variations in the practice. A large majority (80%) of centers performed PSQA measurements on all VMAT plans. Most employed pseudo-3D array detectors with a true composite (TC) geometry. No standard approach was found for stopping or reducing frequency of measurements. The sole use of delivery log evaluation was not widely implemented, though most centers expressed interest in adopting this technology. All used the Gamma evaluation method for analyzing PSQA measurements; ho...
Source: Journal of Applied Clinical Medical Physics - Category: Physics Authors: Source Type: research