Individual effect of shear rate and oxygen transfer on clavulanic acid production by Streptomyces clavuligerus

Bioprocess Biosyst Eng. 2021 Apr 5. doi: 10.1007/s00449-021-02555-1. Online ahead of print.ABSTRACTThe production of biocompounds through the cultivation of filamentous microorganisms is mainly affected by Oxygen Transfer Rate (OTR) and shear rate ([Formula: see text]) conditions. Despite efforts have been made to evaluate the effect of operating variables (impeller speed, N; and airflow rate, ϕair) on clavulanic acid production, no analysis regarding the effect of OTR and [Formula: see text] was made. Then, the aim of this study was to evaluate the dissociated effect of physical phenomena such as oxygen transfer and shear rate in the production of clavulanic acid from Streptomyces clavuligerus using a stirred tank bioreactor. Streptomyces clavuligerus cultivations were performed at five different OTR and [Formula: see text] conditions by manipulating the operating conditions (N, ϕair, and gas inlet composition). Cultivations performed at equal impeller speed (600 rpm, similar [Formula: see text]) using oxygen enrichment, showed that CA productivity (ProdCA) was positively affected by OTR increase. Subsequently, the different shear conditions (achieved by varying the impeller speed) lead to an increase in CA production levels. Despite both OTR and shear rate positively enhanced CA productivity, [Formula: see text] exhibited the highest impact: an increase of 145% in OTRinitial enhanced the clavulanic acid productivity of about 29%, while an increment in the shear rate of 13...
Source: Bioprocess and Biosystems Engineering - Category: Biomedical Engineering Authors: Source Type: research