Agroindustry Residues as a Source for Cellulose Nanofibers Production

Our study was motivated by the large amount of crop residues produced in Brazil, which represent underutilized waste biomass and a serious threat to the environment because of the landfilling. For example, even though the corn crop is not popular in Brazil, it is produced in the area of around 18-20 million hectares with an average production of 5-6 t ha-1. That is the reason to seek for the crop residues value-added applications as proposed in the present study. Four Brazilian crop waste biomass: orange bagasse, corn husks, sugarcane straw and coffee residues were used for cellulose nanofibers (CNF) production. CNFs were prepared using alkali treatment, followed by bleaching with sodium chlorite and extraction with oxalic acid. All steps were applied under moderate conditions of temperature and pressure, such as temperature of 120 °C and below, water solutions with chemicals ’ concentrations lower that 10% and short sonication pulses. CNFs with diameters in the range 50-70 nm were obtained and products from orange bagasse and corn husks presented high crystallinity indexes (CI), 0.72 and 0.75, respectively. The highest CNF yield was obtained from corn husks (38.5%) followed by sugarcane straw (24.0% with CI of 0.69). CNFs obtained from coffee residues showed a CI value of 0.65 after two bleaching steps. Different CNF morphologies were obtained according to the raw material. The four-crop waste biomass can be considered as excellent starting materials for CNF production i...
Source: Journal of the Brazilian Chemical Society - Category: Chemistry Source Type: research