Synthesis and characterization of an NH 4 CL-induced Eskanbil activated carbon (EAC) for the removal of penicillin G from contaminated water

This study aimed to determine the efficiency of modified Eskanbil activated carbon for the removal of PG from aqueous solutions. The NH4Cl-induced activated carbon was synthesized by a simple method and used for the degradation of PG in contaminated water. Activated carbon was characterized by Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Brunauer –Emmett–Teller (BET) surface area analysis. The four main reaction parameters optimized in this study were pH, time, the concentration of the EAC (Eskanbil Activated Carbon), and initial PG concentration. The synthesized carbon was characterized and the results showed it as a mesoporous material with the BET specific surface area of 1473 m2/g and pore volume of 0.81 cm3/g. The maximum PG adsorption onto EAC was observed at the pH of 6. The PG removal of 33% at an EAC concentration of 0.1 g/L increased to 99.98% at an activated carbon concentration of 0.5 g/L. The isotherm and kinetic studies of PG removal by EAC showed that the Freundlich model (R2 >  0.995) and the pseudo-second-order (R2 >  0.983) equation represented the best fit with the adsorption data. EAC is recommended as a suitable and cost-efficient adsorbent for removing poisons, pharmaceuticals, and other emerging contaminants from water resources.
Source: Journal of Environmental Health Science and Engineering - Category: Environmental Health Source Type: research