Post-exercise Response of Arterial Parameters for Arterial Health Assessment Using a Microfluidic Tactile Sensor and Vibration-Model-Based Analysis: A Proof-of-Concept Study

The objective of this study is to propose a novel method that can measure post-exercise response of arterial parameters and is also suitable for routine use.ApproachA microfluidic tactile sensor with a location-insensitive configuration was used for arterial pulse signal measurements on six asymptomatic male subjects, offering measurement reliability, ease use by a layperson, and affordability. By treating the arterial pulse signal as a vibration signal of the arterial wall, vibration-model-based analysis of only one measured pulse signal with no calibration was conducted for simultaneous estimation of three arterial parameters. Exercise-intensity-normalized percent changes in arterial parameters were utilized to remove the influence of variation in exercise intensity on post-exercise response, and then their measured values were compared for difference in post-exercise response between the subjects.Main ResultsOne subject who was obese, on subject who had insomnia, and the oldest subject in the study demonstrated differences in post-exercise response at the radial artery (RA), as compared with the three subjects free of those three factors. Despite a lack of statistical significance, the observed difference at the RA between subjects was supported by (i) their consistency with the related findings in the literature, and (ii) their consistency with the measured values at the carotid artery (CA) and superficial temporal artery (STA) and the anatomical difference between the th...
Source: Cardiovascular Engineering and Technology - Category: Cardiology Source Type: research