Development of in situ nanofibrillar poly (lactic acid)/poly (butylene terephthalate) composites: Non-isothermal crystallization and crystal morphology

Publication date: 15 February 2020Source: European Polymer Journal, Volume 125Author(s): Mahboobeh Shahnooshi, Azizeh Javadi, Hossein Nazockdast, Volker AltstädtAbstractTuned one-step melt spinning of poly (lactic acid) (PLA)/poly (butylene terephthalate) (PBT) blends containing 1–10 wt% of PBT, was carried out successfully to induce in situ nanofibrils of PBT with average diameter of 23–51.4 nm. Scanning electron microscopy (SEM) images showed the morphology of PBT nanofibrils (NFs) in the PLA matrix and it was found that the aspect ratio of PBT NFs was more than 400. The crystal morphology of the PLA melt spun fibers in the presence and absence of PBT NFs was analyzed using polarized optical microscopy. Dramatic changes in the crystal morphology of PLA were observed in the presence of PBT NFs. Scattered spherulites in the PLA fibers changed to very small crystals oriented in the PBT NFs direction in the PLA/PBT fibers. Non-isothermal crystallization studies of PLA in the in situ nanofibrillar composites (NFCs) prepared by compression molding demonstrated a significant improvement of crystallinity (27.5%) as well as crystallization rate. Enhanced crystallization rate provided comparative conditions to study the crystal forms of PLA and their relative populations nucleated during the cold and melt crystallizations. Moreover, the crystallization behavior of PLA/PBT blend with droplet-matrix morphology was compared with that of the NFC sample at the same PBT content to e...
Source: European Polymer Journal - Category: Chemistry Source Type: research