Hydroxyapatite/sericin composites: A simple synthesis route under near-physiological conditions of temperature and pH and preliminary study of the effect of sericin on the biomineralization process

Publication date: March 2020Source: Materials Science and Engineering: C, Volume 108Author(s): Anabela Veiga, Filipa Castro, Cassilda Reis, Aureliana Sousa, Ana L. Oliveira, Fernando RochaAbstractSynthesis of hydroxyapatite (HAp) and sericin (SS) nanocomposites was carried out by a simple precipitation method performed in batch in a stirred tank reactor (ST). The reaction was achieved by mixing a solution of calcium chloride dihydrate, in which SS was dissolved, with a solution of disodium hydrogen phosphate at 37 °C. Three experimental conditions were studied by varying the concentration of SS: HAp, HAp/SS1 (0.01 g/L of SS) and HAp/SS2 (1 g/L of SS). The chemical and physical properties of the resulting HAp/SS nanocomposites were studied using several techniques (Atomic Absorption Spectrometry, Ultraviolet-Visible Spectrophotometry, Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Selected area diffraction (SAED) and Thermogravimetric analysis (TGA)). pH profile was also monitored over time for each experimental condition. The results revealed that nano single-phased HAp was formed with both rod and plate-like shape. Additionally, the particles have low crystallinity, characteristic similar to biological HAp. Regarding the influence of SS, one observed that with increasing SS concentration there is an increase in the mean particle size and the number of plate-like parti...
Source: Materials Science and Engineering: C - Category: Materials Science Source Type: research