Welding characteristics of butt-welded Inconel625 plate using CO2 laser beam

In this study, the joints of Inconel625 are made with CO2 Laser beam welding process. The experimentation is carried out with two sets of process parameters varying the laser power and estimating the response of the welded component. Radiography analysis and distortion in the weldments are carried out. Distortion is measured using the Vernier height gauge. The lower the better-quality characteristics are chosen for distortion. The welds are free from flaws and the lower heat input results in the lower distortion.
Source: Materials Today: Proceedings - Category: Materials Science Source Type: research