Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium

ConclusionsBoth manufacturing methods showed regular microstructures prior to porcelain firing. Laser-sintered CoCr had stronger bonding to porcelain than milled pre-sintered CoCr and was also more stable microstructurally post-ceramic firing. However, both manufacturing methods were deemed to have satisfactory adhesion strength to porcelain. It was also found that increased hardness of CoCr had an inverse relationship with bonding strength. High strength porcelain bonding and stability following multiple ceramic firings indicate suitability for use of these CoCr materials with implant or tooth supported long-span frameworks.
Source: Journal of Prosthodontic Research - Category: Dentistry Source Type: research