Enhanced sensor life using UV treatment of sulphur poisoned Pt-PtOx

Publication date: Available online 17 December 2018Source: Materials Research BulletinAuthor(s): Samatha Benedict, Navakanta BhatAbstractIn this work,we report a novel method for recovery of sulphur poisoned platinum/platinum oxide (Pt-PtOx) core-shell nanowire sensor using UV irradiation.The optimum core to shell thickness ratio and the operating conditions are the key factors to achieve a high-performance H2S sensor,described in this report.The fabricated core-shell nanowire sensor demonstrated response of 6.4% at 1 ppm H2S with detection limit of 10 ppb at 150 °C operating temperature. The sensor undergoes prominent time-dependent poisoning at H2S exposure of 3 ppm when operated at 150 °C due to sensor surface contamination by sulphur,later confirmed by XPS analysis. Ultraviolet light at two wavelengths, 365 nm, and 248 nm is investigated to recover the poisoned Pt-PtOx surface.UV irradiation at 248 nm for 5 minutes results in sensor recovery, confirmed by further H2S sensing characterization and XPS studies on the recovered sensor. To the best of our knowledge, this is one of the first reports on UV irradiation for recovery of sulphur poisoned metal-oxide surfaces.Graphical abstract
Source: Materials Research Bulletin - Category: Materials Science Source Type: research