Cardiac T2 star mapping: standardized inline analysis of long and short axis at three identical 1.5  T MRI scanners

AbstractT2 star mapping can be applied for in vivo cardiac iron quantification. Current recommendations of imaging acquisition, post-processing and interpretation of normal values are based on old scanner types and in house software packages. A standardized comparison of short (SAX) and long axis (LAX) segments using commercially available software packages and modern scanners is lacking. To provide a standardized comparison of T2 star time values in SAX and LAX and to investigate intersegmental, interregional and inter-level comparison and the interscanner reproducibility. 84 cardiac MRIs in 28 healthy volunteers were performed with three structurally identical 1.5  T MRI scanners. A commercially available software package for T2 star mapping with automatic in-line motion correction was used for analysis. Regions of interest were manually placed in each of the 16 myocardial segments according to the AHA model in three SAX and three LAX. A total of 2856 ROIs w ere drawn and 102 segments per volunteer were analysed. Interscanner reproducibility was high (91%) and the mean myocardial T2 star time value for all evaluated segments was 34 ± 5.7 ms. No significant difference was found between all measurements in SAX (35 ± 5.5 ms) and LAX (34 ±  5.8 ms). T2 star time values varied significantly between heart segments in the same axis and in 44% between corresponding SAX and LAX segments. T2 star time values in SAX and LAX have a high interscanner reproducibility b...
Source: The International Journal of Cardiovascular Imaging - Category: Radiology Source Type: research