Sensors, Vol. 18, Pages 3179: Extended Line Map-Based Precise Vehicle Localization Using 3D LIDAR

Sensors, Vol. 18, Pages 3179: Extended Line Map-Based Precise Vehicle Localization Using 3D LIDAR Sensors doi: 10.3390/s18103179 Authors: Jun-Hyuck Im Sung-Hyuck Im Gyu-In Jee An Extended Line Map (ELM)-based precise vehicle localization method is proposed in this paper, and is implemented using 3D Light Detection and Ranging (LIDAR). A binary occupancy grid map in which grids for road marking or vertical structures have a value of 1 and the rest have a value of 0 was created using the reflectivity and distance data of the 3D LIDAR. From the map, lines were detected using a Hough transform. After the detected lines were converted into the node and link forms, they were stored as a map. This map is called an extended line map, of which data size is extremely small (134 KB/km). The ELM-based localization is performed through correlation matching. The ELM is converted back into an occupancy grid map and matched to the map generated using the current 3D LIDAR. In this instance, a Fast Fourier Transform (FFT) was applied as the correlation matching method, and the matching time was approximately 78 ms (based on MATLAB). The experiment was carried out in the Gangnam area of Seoul, South Korea. The traveling distance was approximately 4.2 km, and the maximum traveling speed was approximately 80 km/h. As a result of localization, the root mean square (RMS) position errors for the lateral and longitudinal directions were 0.136 m and 0.223 m, respectively.
Source: Sensors - Category: Biotechnology Authors: Tags: Article Source Type: research