The heat transfer enhancement techniques and their Thermal Performance Factor

Publication date: March 2018Source: Beni-Suef University Journal of Basic and Applied Sciences, Volume 7, Issue 1Author(s): Chirag Maradiya, Jeetendra Vadher, Ramesh AgarwalAbstractHeat transfer devices have been used for conversion and recovery of heat in many industrial and domestic applications. Over five decades, there has been concerted effort to develop design of heat exchanger that can result in reduction in energy requirement as well as material and other cost saving. Heat transfer enhancement techniques generally reduce the thermal resistance either by increasing the effective heat transfer surface area or by generating turbulence. Sometimes these changes are accompanied by an increase in the required pumping power which results in higher cost. The effectiveness of a heat transfer enhancement technique is evaluated by the Thermal Performance Factor which is a ratio of the change in the heat transfer rate to change in friction factor. Various types of inserts are used in many heat transfer enhancement devices. Geometrical parameters of the insert namely the width, length, twist ratio, twist direction, etc. affect the heat transfer. For example counter double twisted tape insert has TPF of more than 2 and combined twisted tape insert with wire coil can give a better performance in both laminar and turbulent flow compared to twisted tape and wire coil alone. In many cases, roughness gives better performance than the twisted tape as seen in case of flow with large Prandt...

Source: Beni Suef University Journal of Basic and Applied Sciences - July 11, 2018 Category: Science Source Type: research